I've got a Mikrotik that's connected to Proton with Wireguard. It uses routing rules to control which traffic goes through VPN.
It's pretty much "set it and forget it" once you get everything configured the way you want.
News media has to make every mundane exchange sound like a WWE match with clickbaity bullshit headlines.
Many years ago, there was a televised interview with Saddam Hussein. I don't remember which TV network it was on but it was a pretty big deal. This was early 2000's before the US invasion of Iraq. I think the translator referred to then President Bush as "Bush". Saddam didn't understand a lot of English but he understood that. He interrupts the translator mid-sentence to inform him that what he should have said was "Mr. Bush", with a sort of tone that felt like he did not appreciate being misquoted.
I don't know if that dude even realized how close he probably came to being strangled to death with a microphone cord.
Hoover Dam and Valley of Fire State Park are both cool stops that aren't too far away. I've never been to the Pinball Museum so I'll have to check that one out next time.
Vegas is a good place to go if your idea of a good time is eating and hanging around the pool. Other than that, it's a glittering shithole in the desert built on the losses of prior visitors.
Yep. Split tunneling has been a standard option for a long time.
Wireguard. Wireguard is fairly easy to configure and keeping your setup behind the firewall is much less headache in the long run.
First rule of hosting publicly available services is "Don't. Unless you absolutely have to." Second rule is: "If you have to, do it very carefully."
I think administrative overhead is the hidden cost that a lot of technology vendors fail to consider. Microsoft is especially guilty of this. Is a "good" product that requires an obscene amount of esoteric knowledge and experience to maintain really that good?
Microsoft is sunsetting Hyper-V Server (Not Hyper-V itself) so now you have to run Hyper-V on a bloated Windows Server install. Too bad because Hyper-V is actually a decent hypervisor and Microsoft is shutting out a lot of their smaller customers who don't have the money for tons of exhorbitant licensing.
I even use Hyper-V for my self hosted setup but I'll be forced to switch in a few years whenever my host server is ready for retirement.
The benefit of splitting services between VM's is the same as it always has been: I can break one service without breaking ALL of them. Containers are an improvement over native installs but they do not solve this problem completely.
I had to show off my newest acquisition. Picked up an old Rockwell 22-650 planer from a guy on Craigslist. I replaced the knives, greased it, and dialed it in. It works great! If I ever have to move it again, I'll get someone with a tractor to help. Still not sure how I managed to muscle all 400+ lbs of it into the basement by myself. I was dumb enough to try that once but not enough to do it twice.
I've seen several big chains, mostly gas stations and fast food, advertising "daily pay". If you are worried about how you're going to make it until your next paycheck, whether it's tomorrow or next month, or you have no savings to cover any sort of emergency, then you live paycheck-to-paycheck.
Don't be fooled. "Daily Pay" is just a shitty attempt at avoiding paying better wages by giving you your shitty wages faster. It's designed to benefit the company, not you.
Edit: If you don't get to hold on to your pay check long enough to earn interest on any of it, then getting paid daily is not benefiting you.
That was my first attempt at electrifying a gas mower. I used a 2 HP induction motor attached to a mount designed to be a drop in replacement for the engine. The first version used the frame from a Troy Bilt front wheel drive mower. This one only had a single speed transmission and couldn't handle the added weight from the motor. I think I used it for one season before replacing it with Version 2.
If you want to buy a new lawn mower, you can go down to your local big box retailer and find that most of the available options are probably battery electric mowers.
But, not that many years ago, electric mowers kinda sucked. The few choices you had were all corded but more importantly, they were cheaply built and lacked power. They also had none of the features of gas mowers, like being self propelled. After wearing out two of them within a couple years I thought, "This is cannot be that hard. I bet I can build a better electric mower."
A rotary lawn mower is pretty basic. Engine spins blade, blade cuts grass. That's pretty much it. If you wanted to "electrify" a gas mower, you would need a motor that could supply sufficient torque and keep the blade speed within the right range.
I picked up a 2 HP induction motor and mounted it on a frame which would basically serve as a drop-in replacement for the engine. I also built a switch which connected to the dead-man switch/engine brake bar, allowing the motor to be turned on and off.
I quickly learned the importance of selecting the right mower to convert. My first attempt was a Troy Bilt front wheel drive, which did not work well. Electric motors are heavy and the induction motor was substantially heavier than the engine it was replacing. The front wheel drive mechanism was not designed to handle the extra weight and it made navigating difficult.
My next attempt was with a John Deere rear wheel drive. That one was a winner. I ended up building a really solid electric mower that performs nearly on par with a gas mower. The only downside is that it requires a heavy extension cord due to the power draw but once you get used to the cord it's not that bad.
I used this thing for probably 8 years without any problems and no maintenance besides sharpening the blade and greasing the bearings about once a year. I replaced it with a cordless mower last summer but I'm not getting rid of it. It's in my shop getting a badly needed rebuild and a safety upgrade (adding an electric brake). It'll be back on the job, at least part time, whenever I get a chance to put it back together.
More photos in the comments.
Recently had a new standing seam metal roof installed. Roofers could talk the talk but I was not impressed with the quality of work overall. My main complaint is that they installed the roof so that most of the sewer vents go right through the middle of a seam. The boots are clearly not designed to accommodate this and they've succeeded in creating more work for me in the future; which is what I was trying to to avoid by spending the extra money to upgrade to metal. The boots are going to leak. In fact, they already have.
I was pretty pissed about this initially and told the owner of the roofing company that if they had bothered to tell me this was going to happen, I would have moved the damned vent pipes myself if they weren't going to. The right fix would be to replace the panels and move the vent pipes but I have a feeling getting them to do that is going to be difficult if not impossible.
Is there a boot that's designed for this kind of install or a better way of sealing these? Or, am I going to be stuck checking and resealing them every couple of years?
Edit: Resolved. Decorative brick is actually a chase and doesn't need to be completely filled in. Thanks to @Death_Equity@lemmy.world for advice on rebuilding the crown.
I have a double sided wood burning brick fireplace which is honestly just a big collection of code violations. It was converted to propane shortly after -- I'm assuming -- the people who built the house 50 years ago discovered that it smoked badly in the house. I fixed all the major issues with the firebox and smoke chamber and converted it back to wood burning this past winter.
I had a new steel cap fabricated to replace the old brick and concrete cap, which I removed. During this process, I discovered that the brick is basically just a facade. There are huge gaps on either side of the flues which are encased in 4" cinder blocks. My understanding of fire code (at least in the US) for masonry fireplaces is that the material surrounding the flue is not permitted to have any gaps in it. NFPA says all gaps in the brick should be filled with mortar. However, I'm not sure what to do with a gap this large. I'm not sure if filling it with mortar or concrete is an option. I've considered installing a steel flue liner but those are expensive and there are two flues. I'm also concerned about steel liners changing the draft characteristics since the chimney is on the short side.
If money were no object, I would tear this thing out and put a more efficient steel insert in but that is cost prohibitive.
Anyone have any experience fixing something like this?
Found a piece of bread in a store bought loaf that didn't get sliced properly.
Had a nice little foundation leak during the last rain storm. Installed a drain line last fall to divert two downspouts and front walkway run off away from the house which helped a lot. Front walkway and a big retaining wall next to it ultimately need to be removed and reinstalled with proper grading and drainage. That's going to be a huge and expensive project so for now I'm just replacing all the worn out concrete sealant and hoping for the best.
Took this picture from the top of Hoover Dam about 6 years ago.
PSA
If you have been sexually assaulted or abused by someone, please tell somebody. Preferably the police, but if not them then tell someone else that you trust. I know this is a huge ask. I know you want to completely erase it from your memory. I know that doing this means unleashing a shit storm that you can never undo. I know it's going to dredge up all kinds of pain. I know it might permanently reshape your life. I know it's going to be incredibly hard. It's probably going to take courage that you're not even sure you have.
The reason I'm asking you to do this is because there's a really good chance that the person who did this to you has done it before or will do it again. YOU may be the only thing standing between the perpetrator and their next victim. The fact that it happened to you is terrible and I'm so sorry for that. But you have the power to help make sure what happened to you doesn't happen to anyone else. So please tell someone because you might very well be the hero, that you needed, for someone else. There are few things in life more honorable than that.