Buildapc

3686 readers

1 users here now

founded 1 year ago

MODERATORS

Lemmenmo@lemmy.world

Help with AM5 cooler causing motherboard flex. [Solved] (sh.itjust.works)

submitted 1 month ago* (last edited 1 month ago) by HumanPerson@sh.itjust.works to c/buildapc@lemmy.world

8 comments fedilink hide all child comments

I recently built a computer for someone. It was just for general use, not gaming or anything, so I went with fairly simple specs. Because they wanted an insanely quiet computer, I went with an NHD15S. The problem is that cooler causes flexing in the motherboard that makes the CPU not make contact with the socket. Is there a not overly janky way that I could fix that without getting a smaller cooler? I know flexing is the issue because it works for a while with the big cooler, but eventually won't boot after being shut down, or crashes in weird ways and then won't boot, and the mobo lights always show a CPU and dram light. The box cooler has no issues, but is louder under load.

Edit: it does boot with the large cooler if the system is on it's side. I followed the mounting instructions carefully.

Edit 2: Solved. I was overtightening.

top 8 comments

sorted by: hot top controversial new old

[–] UnpledgedCatnapTipper@lemmy.blahaj.zone 5 points 1 month ago (2 children)

Is it mounted correctly? Usually motherboard flex from a cpu cooler is due to tightening things too much or mounting incorrectly in some way like using the wrong mounting hardware or the wrong holes/slots on the mounts.

[–] fuckwit_mcbumcrumble@lemmy.dbzer0.com 2 points 1 month ago

I don't think it's possible to over tighten a noctua heatsink. They have hard stops and you're supposed to tighten it to those stops.

https://noctua.at/pub/media/proslider/banner_lga1700_home_3.jpg

Ignore that it's the intel one, but you can't really overtighten this mount. I just thought, OP you have the backplate installed right?

[–] HumanPerson@sh.itjust.works 1 points 1 month ago* (last edited 1 month ago) (1 children)

I could be overtightening. I will try to be careful not to.

Edit: It appears you were right. Thank you.

[–] UnpledgedCatnapTipper@lemmy.blahaj.zone 1 points 1 month ago

Awesome, glad you got it working!

[–] Romkslrqusz@lemm.ee 4 points 1 month ago

Review the manual again and redo installation. The cooler is not properly installed.

[–] fuckwit_mcbumcrumble@lemmy.dbzer0.com 4 points 1 month ago

Something else is wrong with your system if an NH-D15 is causing the system to not boot. The flex from the heatsink shouldn't be perceptible.

Are you missing a bunch of motherboard standoffs or something? Is your CPU not socketed fully somehow?

[–] hitagi@ani.social 1 points 1 month ago

I never knew overtightening was a real issue until it happened to me. I was going to send back my motherboard until I saw someone suggest to loosen the screws of my heatsink.

That actually worked.

[–] catloaf@lemm.ee -1 points 1 month ago

Fabricate a support bracket or turn the PC on its side.