this post was submitted on 04 Jul 2024
176 points (91.5% liked)

Coffee

8254 readers
107 users here now

☕ - The hot beverage that powers the world!

Coffee gadgets - It's always great to learn about new gadgets. Please share your favorite hardware or full setups. It might inspire newcomers to experiment!

Local businesses - Please promote your local businesses. If you are not the owner of the business you are promoting, kindly ask the owner if it's okay. It would be great if the business has a physical store to include an exterior or interior shot.

founded 1 year ago
MODERATORS
martijn@lemmy.world
dannoffs@lemmy.sdf.org
176
Aeropress has easily become my favourite way to brew coffee ☕ (slrpnk.net)
submitted 2 months ago by Sunny@slrpnk.net to c/coffee@lemmy.world
88 comments fedilink hide all child comments
 
you are viewing a single comment's thread
view the rest of the comments
[–] apfelwoiSchoppen@lemmy.world 28 points 2 months ago* (last edited 2 months ago) (3 children)

I've kept the rubber plunger out of the tube when in storage. When kept inside the tube it compresses the rubber and retains the shape memory which causes it to fail. Haven't ever replaced mine and it is eight years old. Still works perfectly.

[–] Bakkoda@sh.itjust.works 4 points 2 months ago (1 children)

My original one i had to do this but the one i have now, if you fully depress the plunger with no coffee in it it comes out the bottom just enough to not squeeze the sides.

[–] Sunny@slrpnk.net 2 points 2 months ago

Great tip! Thank you 🙌

[–] Hamartiogonic@sopuli.xyz 1 points 2 months ago* (last edited 2 months ago) (1 children)

Just push the piston all the way in, and the rubber clicks when it comes out the other end of the cylinder. This way you can store it in a compact package.

[–] apfelwoiSchoppen@lemmy.world 2 points 2 months ago (1 children)

Mine does not do this.

[–] Hamartiogonic@sopuli.xyz 1 points 2 months ago* (last edited 2 months ago) (1 children)

Interesting. I’m using the AP Go, so maybe the normal one doesn’t extend all the way through.

Edit: just checked how my normal AP works. It’s basically the same as the AP Go, but I guess this is a fairly new model, so there may have been some changes.

Are you using an older version?

[–] apfelwoiSchoppen@lemmy.world 2 points 2 months ago (1 children)

Yes, it is eight years old.

[–] Hamartiogonic@sopuli.xyz 1 points 2 months ago (1 children)

It seems that the older models had a problem that was fixed. So, the tip needs to be tweakws a bit.

If you have an older model, store the pieces separately in order to prevent the rubber from being under constant compression. If you have a newer model, push the piston all the way in until the end of the piston pops out the other end. Oh, and that is only possible if the cap isn’t screwed on. That piece needs to be stored separately anyway.

[–] apfelwoiSchoppen@lemmy.world 2 points 2 months ago* (last edited 2 months ago)

Yes, the existing comments already allude to these problems/solutions.