mobergmann

Why is the exposure time/ shutter speed for my phone capped at 1/2 (half a second)? I would like to take photos with an exposure time of up to 30 seconds. Even when installing other apps, like GCam or Open Camera, it is not possible to increase the exposure time. I have an Fairphone 4 with Android 13.

In the screenshot you can see that the exposure time (S) is at the maximum value.

Do you have the same "issue" as me, or know how to fix it?

I am living in Germany and I need some Keycaps, which are not expensive. They don't need to be special, they just need to... work.

cross-posted from: https://lemmy.world/post/14160134

I want to reset my server soon and I'm toying with the idea of using a different operating system. I am currently using Ubuntu Server LTS. However, I have been toying with the idea of using Fedora Server (I use Fedora on my laptop and made good experiences with it) or even Fedora CoreOS. I also recently installed NixOS on my desktop computer and find the declarativeness pretty cool (but I'm still a complete beginner) and could imagine that it would fit well into a server setup.

I have quite a few services running on my server, such as Nextcloud, Conduit (Matrix), Jellyfin, etc. and all in containers. I would also rather not install programs without containers, because 1. compose is super easy to maintain and set up, 2. it remains very clear with containers (and compose) and 3. I believe that containers are more secure. But since I also want to make the services inside the containers available, I currently have Nginx installed as a reverse proxy (not in the container, but on the system) and always create certificates with certbot so that I can use HTTPS encryption.

In the paragraph above I actually described exactly the use-case of Fedora CoreOS, but I have no experience with the system and how it works. That's why I'm still a bit hesitant at considering the OS at the moment. I can imagine that NixOS with its declarative nature seems well suited, since, as I have heard, you can configure containers as well as Nginx and with Nginx also https certificates declaratively. But I could also use a base system like before (Fedora Server or Ubuntu Server) and simply install podman, nginx and certbot and manage everything that way.

Have you had any experience with Fedora Server, Fedora CoreOS, NixOS or a completely different operating system for servers and what are/were your impressions with this setup? Or do you just want to share your knowledge here? I would be delighted.

cross-posted from: https://lemmy.world/post/14160134

I want to reset my server soon and I'm toying with the idea of using a different operating system. I am currently using Ubuntu Server LTS. However, I have been toying with the idea of using Fedora Server (I use Fedora on my laptop and made good experiences with it) or even Fedora CoreOS. I also recently installed NixOS on my desktop computer and find the declarativeness pretty cool (but I'm still a complete beginner) and could imagine that it would fit well into a server setup.

I have quite a few services running on my server, such as Nextcloud, Conduit (Matrix), Jellyfin, etc. and all in containers. I would also rather not install programs without containers, because 1. compose is super easy to maintain and set up, 2. it remains very clear with containers (and compose) and 3. I believe that containers are more secure. But since I also want to make the services inside the containers available, I currently have Nginx installed as a reverse proxy (not in the container, but on the system) and always create certificates with certbot so that I can use HTTPS encryption.

In the paragraph above I actually described exactly the use-case of Fedora CoreOS, but I have no experience with the system and how it works. That's why I'm still a bit hesitant at considering the OS at the moment. I can imagine that NixOS with its declarative nature seems well suited, since, as I have heard, you can configure containers as well as Nginx and with Nginx also https certificates declaratively. But I could also use a base system like before (Fedora Server or Ubuntu Server) and simply install podman, nginx and certbot and manage everything that way.

Have you had any experience with Fedora Server, Fedora CoreOS, NixOS or a completely different operating system for servers and what are/were your impressions with this setup? Or do you just want to share your knowledge here? I would be delighted.

I want to reset my server soon and I'm toying with the idea of using a different operating system. I am currently using Ubuntu Server LTS. However, I have been toying with the idea of using Fedora Server (I use Fedora on my laptop and made good experiences with it) or even Fedora CoreOS. I also recently installed NixOS on my desktop computer and find the declarativeness pretty cool (but I'm still a complete beginner) and could imagine that it would fit well into a server setup.

I have quite a few services running on my server, such as Nextcloud, Conduit (Matrix), Jellyfin, etc. and all in containers. I would also rather not install programs without containers, because 1. compose is super easy to maintain and set up, 2. it remains very clear with containers (and compose) and 3. I believe that containers are more secure. But since I also want to make the services inside the containers available, I currently have Nginx installed as a reverse proxy (not in the container, but on the system) and always create certificates with certbot so that I can use HTTPS encryption.

In the paragraph above I actually described exactly the use-case of Fedora CoreOS, but I have no experience with the system and how it works. That's why I'm still a bit hesitant at considering the OS at the moment. I can imagine that NixOS with its declarative nature seems well suited, since, as I have heard, you can configure containers as well as Nginx and with Nginx also https certificates declaratively. But I could also use a base system like before (Fedora Server or Ubuntu Server) and simply install podman, nginx and certbot and manage everything that way.

Have you had any experience with Fedora Server, Fedora CoreOS, NixOS or a completely different operating system for servers and what are/were your impressions with this setup? Or do you just want to share your knowledge here? I would be delighted.

What was your beginner keyboard and which keyboard are you using now? It seems, that a lot of people tend to prefer smaller keyboards with layers. I myself am a bit intimidated by them, and would much prefer a somewhat more traditional number of keys, like the Lili58 or the Sofel has (as for now, I think I will get a Lili58).

Do you "regret" buying your first keyboard and would have preferred to start directly with your current keyboard (e.g. for saving money), or do you think that your beginner keyboard was necessary/important for you, to get into Spit-Ortho keyboards?

I want to get a corne keyboard, but I have a few questions, before I dare to dig deeper into the topic.

1. Can I use the keyboard wired and wireless? Meaning, when I plug in a cable, that it (turns of its wireless connection and) uses the cable connection?
2. Can I also just use one site at a time, meaning that the other side is turned off/unplugged?
3. Which version (corne-classic, corne-cherry or corne-chocolate) should I use when I want to use Gateron Hot-Swap Switches (not low-profile)?
4. Do I have to pay attention when buying keycaps, e.g. to also get special sized caps?

cross-posted from: https://lemmy.world/post/11673921

I want to build my own portable E-Reader like a Tolino/Kindle in DIN-A5 format (I know there are similar projects, like the Open Book from joeycastillo, but I want to make my own just for fun). I'm considering using the Compute Module 4 from Raspberry Pi. That, at least according to my theories, would have the advantage of me not needing to create my own OS, and the availability of already existing EPUB/HTML (EPUB is essentially just HTML) & PDF parsers and UI libraries hopefully makes my life easier. I don't want to use a default Raspberry Pi, because I don't need all the ports and I want the size of the E-Reader to be not unnecessarily thick.

The modules I need/want:

• Micro SD Card Reader for internal Storage (or just using eMMC Storage, have not settled yet on that topic)
• SD Card Reader (large/normal sized SD Cards), with a snap-in/spring mechanism (like with Nintendo (3)DS cartridges)
• E-Paper Display (e.g. a waveshare)
• USB-C Port for charging the battery (and maybe, if possible also file transfer and if possible maybe also to connect to a docking station)
• Battery

What is your experience with the Compute Module (4) and do you have good resources for creating my own PCB extension module for the Compute Module you would like to share? Do you have constructive critique for my project idea?

cross-posted from: https://lemmy.world/post/11673921

I want to build my own portable E-Reader like a Tolino/Kindle in DIN-A5 format (I know there are similar projects, like the Open Book from joeycastillo, but I want to make my own just for fun). I'm considering using the Compute Module 4 from Raspberry Pi. That, at least according to my theories, would have the advantage of me not needing to create my own OS, and the availability of already existing EPUB/HTML (EPUB is essentially just HTML) & PDF parsers and UI libraries hopefully makes my life easier. I don't want to use a default Raspberry Pi, because I don't need all the ports and I want the size of the E-Reader to be not unnecessarily thick.

The modules I need/want:

• Micro SD Card Reader for internal Storage (or just using eMMC Storage, have not settled yet on that topic)
• SD Card Reader (large/normal sized SD Cards), with a snap-in/spring mechanism (like with Nintendo (3)DS cartridges)
• E-Paper Display (e.g. a waveshare)
• USB-C Port for charging the battery (and maybe, if possible also file transfer and if possible maybe also to connect to a docking station)
• Battery

What is your experience with the Compute Module (4) and do you have good resources for creating my own PCB extension module for the Compute Module you would like to share? Do you have constructive critique for my project idea?

cross-posted from: https://lemmy.world/post/11673921

I want to build my own portable E-Reader like a Tolino/Kindle in DIN-A5 format (I know there are similar projects, like the Open Book from joeycastillo, but I want to make my own just for fun). I'm considering using the Compute Module 4 from Raspberry Pi. That, at least according to my theories, would have the advantage of me not needing to create my own OS, and the availability of already existing EPUB/HTML (EPUB is essentially just HTML) & PDF parsers and UI libraries hopefully makes my life easier. I don't want to use a default Raspberry Pi, because I don't need all the ports and I want the size of the E-Reader to be not unnecessarily thick.

The modules I need/want:

• Micro SD Card Reader for internal Storage (or just using eMMC Storage, have not settled yet on that topic)
• SD Card Reader (large/normal sized SD Cards), with a snap-in/spring mechanism (like with Nintendo (3)DS cartridges)
• E-Paper Display (e.g. a waveshare)
• USB-C Port for charging the battery (and maybe, if possible also file transfer and if possible maybe also to connect to a docking station)
• Battery

What is your experience with the Compute Module (4) and do you have good resources for creating my own PCB extension module for the Compute Module you would like to share? Do you have constructive critique for my project idea?

cross-posted from: https://lemmy.world/post/11673921

I want to build my own portable E-Reader like a Tolino/Kindle in DIN-A5 format (I know there are similar projects, like the Open Book from joeycastillo, but I want to make my own just for fun). I'm considering using the Compute Module 4 from Raspberry Pi. That, at least according to my theories, would have the advantage of me not needing to create my own OS, and the availability of already existing EPUB/HTML (EPUB is essentially just HTML) & PDF parsers and UI libraries hopefully makes my life easier. I don't want to use a default Raspberry Pi, because I don't need all the ports and I want the size of the E-Reader to be not unnecessarily thick.

The modules I need/want:

• Micro SD Card Reader for internal Storage (or just using eMMC Storage, have not settled yet on that topic)
• SD Card Reader (large/normal sized SD Cards), with a snap-in/spring mechanism (like with Nintendo (3)DS cartridges)
• E-Paper Display (e.g. a waveshare)
• USB-C Port for charging the battery (and maybe, if possible also file transfer and if possible maybe also to connect to a docking station)
• Battery

What is your experience with the Compute Module (4) and do you have good resources for creating my own PCB extension module for the Compute Module you would like to share? Do you have constructive critique for my project idea?

I want to build my own portable E-Reader like a Tolino/Kindle in DIN-A5 format (I know there are similar projects, like the Open Book from joeycastillo, but I want to make my own just for fun). I'm considering using the Compute Module 4 from Raspberry Pi. That, at least according to my theories, would have the advantage of me not needing to create my own OS, and the availability of already existing EPUB/HTML (EPUB is essentially just HTML) & PDF parsers and UI libraries hopefully makes my life easier. I don't want to use a default Raspberry Pi, because I don't need all the ports and I want the size of the E-Reader to be not unnecessarily thick.

The modules I need/want:

• Micro SD Card Reader for internal Storage (or just using eMMC Storage, have not settled yet on that topic)
• SD Card Reader (large/normal sized SD Cards), with a snap-in/spring mechanism (like with Nintendo (3)DS cartridges)
• E-Paper Display (e.g. a waveshare)
• USB-C Port for charging the battery (and maybe, if possible also file transfer and if possible maybe also to connect to a docking station)
• Battery

What is your experience with the Compute Module (4) and do you have good resources for creating my own PCB extension module for the Compute Module you would like to share? Do you have constructive critique for my project idea?