Cool Guides
Rules for Posting Guides on Our Community
1. Defining a Guide Guides are comprehensive reference materials, how-tos, or comparison tables. A guide must be well-organized both in content and layout. Information should be easily accessible without unnecessary navigation. Guides can include flowcharts, step-by-step instructions, or visual references that compare different elements side by side.
2. Infographic Guidelines Infographics are permitted if they are educational and informative. They should aim to convey complex information visually and clearly. However, infographics that primarily serve as visual essays without structured guidance will be subject to removal.
3. Grey Area Moderators may use discretion when deciding to remove posts. If in doubt, message us or use downvotes for content you find inappropriate.
4. Source Attribution If you know the original source of a guide, share it in the comments to credit the creators.
5. Diverse Content To keep our community engaging, avoid saturating the feed with similar topics. Excessive posts on a single topic may be moderated to maintain diversity.
6. Verify in Comments Always check the comments for additional insights or corrections. Moderators rely on community expertise for accuracy.
Community Guidelines
-
Direct Image Links Only Only direct links to .png, .jpg, and .jpeg image formats are permitted.
-
Educational Infographics Only Infographics must aim to educate and inform with structured content. Purely narrative or non-informative infographics may be removed.
-
Serious Guides Only Nonserious or comedy-based guides will be removed.
-
No Harmful Content Guides promoting dangerous or harmful activities/materials will be removed. This includes content intended to cause harm to others.
By following these rules, we can maintain a diverse and informative community. If you have any questions or concerns, feel free to reach out to the moderators. Thank you for contributing responsibly!
view the rest of the comments
Isn't that how you're supposed to do this?
It is. Bring the water to a boil, drop the egg(s).
No. If you throw the eggs in early and have them warm up with the water they're less likely to crack.
The whole cracking egg thing is way overblown. For the longest time we poked holes into the side with the air bubble, turns out that didn't actually do anything either (so we stopped that). It could be that faster or slower heating or the shell makes cracking more or less likely, but unless someone actually (scientifically) tests this, who knows?
The hole does work too though? It helps release inside pressure from the heating process. I pretty much never have an egg crack from doing the poke and putting them into the cold water immediately. Meanwhile, not doing either one of those things and they almost always pop.
Just because there's a logical explanation for why it could work doesn't mean that's actually what happens, or that pressure is even the dominant effect causing cracks.
Cracks could also come from bouncing around in the water, which could be solved by holding them up in some way. Or it could be weak points/areas from not badly formed shells from hens living in too tight quarters or being malnurished, where buying eggs from more humane sources would solve it. Or a combination, where the pressure differences in the water from rising steam bubbles cause uneven water-pressure on the egg, but they only crack when they are sufficiently weak to begin with, so just putting less water in might be enough to not make em crack (cause then there's also less water pressure). I could be the packaging, that some eggs develop cracks during transport and they then make them vulnerable, so more local or differently packaged eggs wouldn't crack at all. As you can see, it's not that hard to come up with logical explanations and just doing a few things differently might just solve the problem, and even then the reason it was resolved might still be something completely different than we thought.
For comparison: I haven't poked a hole into an egg in a long time, and I think I had like one or two crack this year. My eggs come from the farmer one street over, and the hens are freeroaming with plenty of space. They don't get transported at all. Sometimes, I use a steam thingy to boil them, sometimes in water. Even when I did poke holes in, some eggs used to crack anyway, and I'd guess 1 in 3 months in a pretty good guess as to what the frequency was, that's why I said "roughly the same numer" in another comment.
I'm sorry but that's just mental gymnastics.
The pokey thing definitely works. Maybe not 100% of the time but it does work. Keeping them at room temperature also helps a little.
I stopped doing the "pokey thing" and have had roughly the same number of breaks at before, maybe even less (one less point to fracture from without the hole). Subjective interpretation of the effectiveness is useless, as we humans are subject to so many possible bias that's it's impossible to be objective, no matter how hard we try. You can't even eat enough eggs to have a statistically relevant sample size, let alone one large enough to determine if it does or doesn't "help a little".
You "feel" it helps. That's ok. Also ok to act on. It's just about boiling your own eggs.
I‘ve never had a single poked egg break. If I don’t they regularly do. That’s not statistically relevant, sure, but in my personal statistic it seems to work.
I wrote something about this in another comment just now, and while cracks in eggs with holes weren't frequent, they still happened for me. I have been taught to poke holes in when I was young, and just always did and assumed it was needed. Now I stopped and nothing changed, basically. But it also means I have no point of comparison for how often they used to break without having poked holes, since I just never cooked them like that in the (distant) past.
There's also no real downside to poking holes either, so why not if it might help. I have just misplaced my hole-poking-thingy anyway, so that saves some space in my drawer and not having to get a new one.
Never ever had this problem. 🤷♂️
When you put the eggs in are they fridge-cold?
Yes, why? Does that help or shmelp?
When the eggs go from fridge cold to boiling hot I would assume that would increase the chances of them cracking once they got the water.
I agree. Maybe it does, but some other factors are perhaps more important. 🤷♂️
But how do you work out how long they should be boiling, especially if you're after somewhere in the soft boil sweet spot?
I measure from the moment the water starts to boil. 4:30 minutes is a good starting point if you want the yellow to be soft but as mentioned, amount of water, pot, your stove, egg size, it all affects the boiling time quite severely. I wouldn't add or remove more than 15 seconds either if you want to find that sweet spot because it is definitely not like in the picture. 7-8 minutes is pretty much hard boiled for me, but maybe those are some really fat eggs.
Yeah, but then you have to watch your pot for the moment it starts to boil. It's easier to just boil the water, drop them in and then set a timer.
You have to watch out for your water to start boiling either way, so I don't see this as much of a problem.