this post was submitted on 13 Nov 2024
6 points (87.5% liked)

Music and audio production

1233 readers
2 users here now

Need a tip or want to show off your latest music production?

It’s here. Free software will be preferred but all are welcome. Don’t just post links without explanations, we expect you to comment your post or it will be moderated. If you ask something, be as precise as possible, provide context. And now, let’s talk audio!

founded 3 years ago
MODERATORS
 

I have a (weird) question: Is it possible to connect a 3.5mm cable to a microphone‘s headphone out and the other end to a iPad‘s audio in, and record with it? I know an iPad is far from ideal, but there is no other options for me right now.

you are viewing a single comment's thread
view the rest of the comments
[–] anttifantti@sopuli.xyz 4 points 1 month ago (2 children)

The iPads jack input/output can be used to record a signal but you’ll need to connect to the pad with a TRRS cable. This is how the mics that plug directly to your headphone socket work. You may also need a special cable to have a line level signal to work but I haven’t tried this myself. Check out this blog post.

I assume you are using some kind of usb mic with a headphone output? In this case I would instead connect the mic directly to the iPad with a camera connector kit or usb c if it’s a newer iPad. If you must use the headphone output, you will need a trs- trrs cable such as a Rode SC7 but this may not work as intended with the signal levels from the headphone out jack of your mic.

[–] Linsensuppe 1 points 1 month ago* (last edited 1 month ago) (1 children)

Yes it is a USB desk mic. Does this also work with a TRS and not s TRRS?

[–] anttifantti@sopuli.xyz 1 points 1 month ago

TRRS is what the iPad uses for mic input and stereo output like in the typical corded apple earplugs (with a mic). The other end of the cable that goes to your mic is most likely a regular TRS. If you use a regular 3.5mm TRS on both ends, the audio will not be routed to the input of the iPad.

But yeah, a camera connector kit or a cheap audio interface will be a better and more robust solution.