this post was submitted on 24 Sep 2024
37 points (100.0% liked)

Ask Electronics

3298 readers
1 users here now

For questions about component-level electronic circuits, tools and equipment.

Rules

1: Be nice.

2: Be on-topic (eg: Electronic, not electrical).

3: No commercial stuff, buying, selling or valuations.

4: Be safe.

founded 1 year ago
MODERATORS
DavideAndrea@discuss.tchncs.de
linker3000@discuss.tchncs.de
37
What's a good method for a non-technical person to short the terminals of two 0402 resistors ~1mm apart? (lemmy.world)
submitted 1 month ago by ch00f@lemmy.world to c/askelectronics@discuss.tchncs.de
27 comments fedilink hide all child comments
 

I'm working on a mod kit for a popular item, but my target audience isn't likely to have a soldering iron. The majority of the project connects to an exposed ribbon connector, but I need to short two terminals to force a power supply on.

Any ideas on a method I could provide for people who can't solder? Maybe a strip of copper tape?

you are viewing a single comment's thread
view the rest of the comments
[–] bangupjobasusual@lemmy.world 3 points 1 month ago (1 children)

Design a plastic housing for the connector that puts pressure on short while the ribbon is plugged in. Put a short in the plastic housing.

Making some assumptions here but…

[–] ch00f@lemmy.world 2 points 1 month ago (1 children)

Good idea, but the ribbon connects to the other side of the connector.

[–] bangupjobasusual@lemmy.world 1 points 1 month ago

That’s still how I’d do it, just make the plastic bit reach over those other resistors. I’d 3d print the bracket.