datahoarder
Who are we?
We are digital librarians. Among us are represented the various reasons to keep data -- legal requirements, competitive requirements, uncertainty of permanence of cloud services, distaste for transmitting your data externally (e.g. government or corporate espionage), cultural and familial archivists, internet collapse preppers, and people who do it themselves so they're sure it's done right. Everyone has their reasons for curating the data they have decided to keep (either forever or For A Damn Long Time). Along the way we have sought out like-minded individuals to exchange strategies, war stories, and cautionary tales of failures.
We are one. We are legion. And we're trying really hard not to forget.
-- 5-4-3-2-1-bang from this thread
view the rest of the comments
Why a separate VCR for cleaning tapes? It's enough to clean the heads AFAIK.
Also, you should definitely not use default deinterlacing techniques for the video, especially not ones built into these generic dongles. Capture it interlaced, preferrably as losslessly as possible, then use deinterlacing software where you can fine-tune the settings if you need to.
No, TBC most likely cannot be done in software, unless the video features a prominent vertical bar (such as a black border). It depends on the quality you want to reach, look closely and decide if the jitter is acceptable.
Edit: TBC can obviously be done in software if you have the raw composite or head signal but that is not possible with the capture cards you have.
And keep the original interlaced versions too! You never know in the future you may want to use a newer deinterlater that works better. Or a new codec that can preserve more details in smaller files.
I'd keep the tapes too, you never know when the community will come up with better VCRs like how it's happening in the retro computer world where we have things like the GreaseMonkey that can store the raw magnetic transitions on the platters and floppies.
I don't expect newer VCRs to be made, there's a lot of precise mechanical engineering and the R&D that would need to go into making a professional-grade VCR today does not make financial sense. However, there is an option to refurbish existing ones and capture the magnetic signal as directly as possible. On media such as VHS or LaserDisc, the signal is not quite composite video, as that would require some 6 MHz of bandwidth. Instead, the color subcarrier is remodulated to a way lower frequency and then back to normal for playback. The folks behind
ld-decode(a project that takes raw signal from a LaserDisc's laser pickup and translates it into composite video) and its forkvhs-decodehave made software that captures everything the head picks up into a raw file, and then does TBC and chroma decoding to create the best possible video. They also documented what hardware can be used for the capture (usually a firmware-modded Conexant video capture card or a beefy FPGA) and how to connect it to some VCRs' circuitry.Of course, this is quite an over-the-top effort for home tapes, I'd just go with a generic composite capture card that does not deinterlace nor upscale and not bother with TBC.
This is a very cool project! Thank you for sharing it!