this post was submitted on 26 Jun 2024
1721 points (99.1% liked)

Science Memes

11130 readers
2911 users here now

Welcome to c/science_memes @ Mander.xyz!

A place for majestic STEMLORD peacocking, as well as memes about the realities of working in a lab.



Rules

  1. Don't throw mud. Behave like an intellectual and remember the human.
  2. Keep it rooted (on topic).
  3. No spam.
  4. Infographics welcome, get schooled.

This is a science community. We use the Dawkins definition of meme.



Research Committee

Other Mander Communities

Science and Research

Biology and Life Sciences

Physical Sciences

Humanities and Social Sciences

Practical and Applied Sciences

Memes

Miscellaneous

founded 2 years ago
MODERATORS
 
you are viewing a single comment's thread
view the rest of the comments
[–] merc@sh.itjust.works 0 points 4 months ago

at what point does this become true?

It's always true.

A stationary aeroplane on a treadmill will obviously move with the treadmill

What do you mean? The plane has its parking brakes on and moves with the treadmill surface? If you don't have parking brakes engaged and start up a treadmill under a plane, the plane's wheels will spin and the plane will stay pretty much in one place. Because the wheels are free to spin, initially that's all that will happen. The inertia of the plane will keep it in place while the wheels spin. Over time, the plane will start to drift in the direction the treadmill is moving, but it will never move as fast as the treadmill because there's also friction from the air, and that's going to be a much bigger factor.

I assume an aeroplane moving at like 1 km/h still gets pulled backward by the treadmill.

Moving at 1 km/h relative to what? The surface of the treadmill or the "world frame"? A plane on a moving treadmill will be pulled by the treadmill -- there will be friction in the wheels, but it will also feel a force from the air. As soon as the pilot fires up the engine, the force from the engine will be much higher than any tiny amount of friction in the wheels from the treadmill.

but how does it get lift if it is prevented from accelerating from 0 to 1 km/h of ground speed

It isn't prevented from accelerating from 0 to 1 km/h of ground speed. The wheels are spinning furiously, but they're relatively frictionless. If the pilot didn't start up the propeller, the plane would start to move in the direction the treadmill is pulling, but would never quite reach the speed of the treadmill due to air resistance. But, as soon as the pilot fires up the propeller, it works basically as normal. A little bit of the air will be moving backwards due to the treadmill, but most of the air will still be relatively stationary, so it's easy to move the plane through the air quicker and quicker until it reaches take-off speed.