I have an Ender 3 V3 SE, never did a firmware update and haven't had any issues with bed levelling. The auto calibration does its job pretty reliably for me. However, mine had some issues with the gantry being at not quite right angle. It could still print, but it got much better after printing and inserting the appropriate shims under the z-rail mounts.
this post was submitted on 13 Nov 2024
7 points (100.0% liked)
3DPrinting
15618 readers
252 users here now
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
founded 1 year ago
MODERATORS
Thank you! Really appreciate the reply, trying to find info about this has been less than successful. Specifically this happened after firmware 1.0.4 amd was supposedly fixed in 1.0.6 but seems to be nothing else after this to indicate if its fixed or not.
So a couple more questions if you dont mind:
What firmware version are you running? Any reason in particular you didn't update the firmware? And would you say you like the performance?
I'm running 1.0.6 apparently. It simply didn't occur to me to update it, since it's not connected to the internet and worked fine out of the box for me.
I'd consider the performance quite good given the low price. Sure there are faster printers out there, but with the default profile in orca slicer it can do a benchy in ~50 minutes which is good enough for me. And quality wise the prints seem to be on par with what other people are producing with much more expensive printers.
What's missing are some comfort features: no runout sensor, no failed print detection and no network connectivity mean that printing is a relatively manual process and it's "risky" to do long prints unsupervised, because this thing will happily produce spaghetti until the gcode is done.
If OP can find a V3 KE for a decent price then you get filament runout sensor and network connectivity, among with some other nice stuff. And for the failed print detection you can add a Nebula camera which isn't too expensive if you order it from Aliexpress. It also supports rooting so you can add some really nice stuff to it, like Mainsail. I have a KE and I'm pretty happy with it since I got it for a really good price. I don't think I would recommend it at full retail price though.
Thanks for the recommendation! I've got around $300 to spend so I'm a bit flexible in the budget. I'll keep an eye out. Hoping to get a decent black Friday or cyber Monday deal.